Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013SILVERADO 2500 4WD V8-6.0L (CNG)REPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGRELAYS AND MODULES - HVACCOMPRESSOR MOTOR POWER CONTROL MODULETESTING AND INSPECTION
2013 Chevrolet Silverado 2500 4WD V8-6.0L (CNG)
Compressor Motor Power Control Module: Testing and Inspection
2013 Chevrolet Silverado 2500 4WD V8-6.0L (CNG)SECTION Testing and Inspection
Air Conditioning Compressor Control Module Programming and Setup
Air Conditioning Compressor Control Module Replacement
If the Air Conditioning Compressor Control Module is replaced it must be programmed with the latest operating software and vehicle calibrations. Refer to Service Programming System (SPS) Service Programming System (SPS).
Air Conditioning Compressor Control Module Reprogramming
Do not reprogram the Air Conditioning Compressor Control Module, unless directed by a service procedure, or a service bulletin.
Reprogram Air Conditioning Compressor Control Module-Refer to Service Programming System (SPS) Service Programming System (SPS).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.