Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013SILVERADO 2500 2WD V8-6.6L DSL TURBOREPAIR AND DIAGNOSISSTARTING AND CHARGINGCHARGING SYSTEMALTERNATORSERVICE AND REPAIRAUXILIARY GENERATOR BRACKET REPLACEMENT
2013 Chevrolet Silverado 2500 2WD V8-6.6L DSL Turbo
Auxiliary Generator Bracket Replacement
2013 Chevrolet Silverado 2500 2WD V8-6.6L DSL TurboSECTION Auxiliary Generator Bracket Replacement
Auxiliary Generator Bracket Replacement (Diesel)
Removal Procedure
1. Remove the auxiliary generator. Refer to Auxiliary Generator Replacement (KD9) Auxiliary Generator Replacement (KD9).
2. Remove the auxiliary generator bracket bolt (2).
3. Remove the auxiliary generator bracket (1).
Installation Procedure
1. Position the auxiliary generator bracket (2) to the air conditioning (A/C) bracket.
Caution:
Refer to Fastener Caution Fastener Caution.
2. Install the auxiliary generator bracket bolt (1).
Tighten the bolt to 50 Nm (37 lb ft).
3. Install the auxiliary generator. Refer to Auxiliary Generator Replacement (KD9) Auxiliary Generator Replacement (KD9).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.