Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013EXPRESS 1500 RWD V6-4.3LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECRANKSHAFT MAIN BEARING
2013 Chevrolet Express 1500 RWD V6-4.3L
Crankshaft Main Bearing
2013 Chevrolet Express 1500 RWD V6-4.3LSECTION Crankshaft Main Bearing
Crankshaft Bearing Cap Bolt - Preferred Method
First Pass 20 Nm (15 lb ft)
Final Pass 73 degrees
Crankshaft Main Bearing Clearance
#1 - Production 0.02-0.05 mm (0.0008-0.0020 in)
#2, #3, and #4 - Production 0.028-0.058 mm (0.0011-0.0023 in)
#1 - Service 0.0254-0.05 mm (0.0010-0.0020 in)
#2, #3, and #4 - Service 0.025-0.063 mm (0.0010-0.0025 in)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.