Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013CRUZE L4-1.4L TURBOREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER HEAD ASSEMBLY
2013 Chevrolet Cruze L4-1.4L Turbo
Cylinder Head Assembly
2013 Chevrolet Cruze L4-1.4L TurboSECTION Cylinder Head Assembly
Tighten the cylinder head bolts in the sequence as shown and in the following order:
Tighten the cylinder head bolts to 35 Nm (26 lb ft)
Tighten the cylinder head bolts an additional 180°
Refer to Cylinder Head Replacement. Service and Repair
Camshaft Bearing Cap Bolts 8 Nm (71 lb in)
Refer to Camshaft Replacement. Service and Repair
Intake Manifold Service and Repair
Camshaft Gear Sprocket Service and Repair
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.