Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013CORVETTE V8-6.2L SCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECRANKSHAFT MAIN BEARING
2013 Chevrolet Corvette V8-6.2L SC
Crankshaft Main Bearing
2013 Chevrolet Corvette V8-6.2L SCSECTION Crankshaft Main Bearing
Crankshaft Bearing Cap M8 Bolts
First Pass in Sequence 20 Nm (15 lb ft)
Final Pass in Sequence 30 Nm (22 lb ft)
Crankshaft Bearing Cap M10 Bolts
First Pass in Sequence 20 Nm (15 lb ft)
Final Pass in Sequence 80 degrees
Crankshaft Bearing Cap M10 Studs
First Pass in Sequence 20 Nm (15 lb ft)
Final Pass in Sequence 51 degrees
Crankshaft Main Bearing Clearance
Production 0.02-0.052 mm (0.0008-0.0021 in)
Service 0.02-0.065 mm (0.0008-0.0025 in)
First Pass in Sequence 20 Nm (15 lb ft)
Final Pass in Sequence 30 Nm (22 lb ft)
Crankshaft Bearing Cap M10 Bolts
First Pass in Sequence 20 Nm (15 lb ft)
Final Pass in Sequence 80 degrees
Crankshaft Bearing Cap M10 Studs
First Pass in Sequence 20 Nm (15 lb ft)
Final Pass in Sequence 51 degrees
Crankshaft Main Bearing Clearance
Production 0.02-0.052 mm (0.0008-0.0021 in)
Service 0.02-0.065 mm (0.0008-0.0025 in)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.