Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013CORVETTE V8-6.2L SCREPAIR AND DIAGNOSISLIGHTING AND HORNSSERVICE PRECAUTIONS
2013 Chevrolet Corvette V8-6.2L SC
Lighting and Horns: Service Precautions
2013 Chevrolet Corvette V8-6.2L SCSECTION Service Precautions
Halogen Bulb Warning
Warning
Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:
* Turn off the lamp switch and allow the bulb to cool before changing the bulb.
* Leave the lamp switch OFF until the bulb change is complete.
* Always wear eye protection when changing a halogen bulb.
* Handle the bulb only by its base. Avoid touching the glass.
* Keep dirt and moisture off the bulb.
* Properly dispose of the used bulb.
* Keep halogen bulbs out of the reach of children.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.