SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013CORVETTE V8-6.2L SCREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGSERVICE PORT HVACSERVICE AND REPAIR
2013 Chevrolet Corvette V8-6.2L SC

Service Port HVAC: Service and Repair

2013 Chevrolet Corvette V8-6.2L SCSECTION Service and Repair



Air Conditioning Refrigerant Service Valve Core Replacement

Special Tools

* J 39400-A - Halogen Leak Detector

* J 46246 - Valve Core Tool

Removal Procedure




1. Recover the refrigerant from the A/C system. Refer to Refrigerant Recovery and Recharging Refrigerant Recovery and Recharging.

2. Using the J 46246 - Valve Core Tool , remove the valve core from the service port.

Installation Procedure




1. Install the valve core to the service port.

Caution: Refer to Fastener Caution Fastener Caution.

2. Using the J 46246 - Valve Core Tool , tighten the valve core.

Tighten the valve core to 11 Nm (97 lb in).

3. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging Refrigerant Recovery and Recharging.

4. Leak test the fittings of the component using J 39400-A - Halogen Leak Detector.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.