Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013CAMARO V8-6.2L SCREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINFLYWHEELSERVICE AND REPAIR
2013 Chevrolet Camaro V8-6.2L SC
Flywheel: Service and Repair
2013 Chevrolet Camaro V8-6.2L SCSECTION Service and Repair
Engine Flywheel Replacement
Removal Procedure
1. Remove the Clutch Assembly. Refer to Clutch Assembly Replacement Service and Repair.
2. Remove the engine flywheel bolts (133) and the flywheel (134).
3. Clean and inspect the flywheel. Refer to Engine Flywheel Cleaning and Inspection Engine Flywheel Cleaning and Inspection. If the flywheel teeth are damaged, inspect the starter for proper operation. Replace the starter if you find excessive wear or damage to the starter drive. Refer to Starter Replacement (LFX) Service and RepairStarter Replacement (LSA,LS3,L99) Service and Repair.
Installation Procedure
1. Install the engine flywheel bolts (133) and the flywheel (134). Refer to Engine Flywheel Installation Engine Flywheel Installation.
2. Install the Clutch Assembly. Refer to Clutch Assembly Replacement Service and Repair.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.