Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012TRAVERSE AWD V6-3.6LREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINESERVICE AND REPAIROVERHAUL7. INTAKE MANIFOLD REMOVAL
2012 Chevrolet Traverse AWD V6-3.6L
7. Intake Manifold Removal
2012 Chevrolet Traverse AWD V6-3.6LSECTION 7. Intake Manifold Removal
Intake Manifold Removal
1. Disconnect and remove the brake booster hose from the intake manifold.
2. Disconnect and remove the positive crankcase ventilation (PCV) tube from the intake manifold and right camshaft cover.
3. Remove the evaporative (EVAP) hose from the intake manifold and EVAP solenoid.
4. Remove the EVAP solenoid bolts
5. Remove the EVAP solenoid.
6. Remove the fuel pump cover bolts (1).
7. Remove the fuel pump cover (2).
8. Remove the intake manifold bolts.
9. Remove the intake manifold assembly.
10. Remove and discard the lower intake manifold gasket.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.