Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012TRAVERSE AWD V6-3.6LREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLANTILOCK BRAKES / TRACTION CONTROL SYSTEMSYAW RATE SENSORTESTING AND INSPECTION
2012 Chevrolet Traverse AWD V6-3.6L
Yaw Rate Sensor: Testing and Inspection
2012 Chevrolet Traverse AWD V6-3.6LSECTION Testing and Inspection
Vehicle Yaw Sensor Learn
The yaw and lateral accelerometer sensor does not require calibration often. Calibration of the accelerometer sensor might be required after certain service procedures are performed. Some of these procedures are as follows:
* Electronic brake control module (EBCM) replacement
* Yaw and lateral accelerometer sensor replacement
The Yaw Rate Sensor Learn procedure can be completed with a scan tool using the following steps:
1. Place vehicle on a level surface
2. Apply the parking brake, or set the transmission in the P position.
3. Ignition ON, engine OFF
4. Install the scan tool to the data link connector.
5. Scroll to the EBCM, special functions menu on the scan tool.
6. Select Yaw Rate Sensor Recalibration.
7. Press the Reset.
8. Clear any DTCs that may be set.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.