Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012TAHOE 4WD V8-6.0L HYBRIDREPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSDIFFERENTIAL ASSEMBLYSYSTEM SPECIFICATIONS
2012 Chevrolet Tahoe 4WD V8-6.0L Hybrid
System Specifications
2012 Chevrolet Tahoe 4WD V8-6.0L HybridSECTION System Specifications
DRIVE AXLE CAPACITIES
FRONT AXLE
1000 Series (8.25") 1.43 liters (1.51 quarts)
2000, 3000 Series (9.25") 1.73 liters (1.83 quarts)
REAR AXLE
1000 Series without RPO AXN (8.6") 2.03 liters (2.15 quarts)
1000 Series with RPO AXN (9.5" LD) 2.6 liters (2.75 quarts)
2000 Series with RPO LY6 (10.5") 2.6 liters (2.75 quarts)
NOTE: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck fluid level after filling.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.