Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012EXPRESS 2500 V8-4.8LREPAIR AND DIAGNOSISBODY AND FRAMEMIRRORSPOWER MIRROR SWITCHSERVICE AND REPAIR
2012 Chevrolet Express 2500 V8-4.8L
Power Mirror Switch: Service and Repair
2012 Chevrolet Express 2500 V8-4.8LSECTION Service and Repair
Power Mirror Switch Replacement
Removal Procedure
1. Remove the front door trim plate (1). Refer to Front Door Trim Plate Replacement Front Door Trim Plate Replacement.
2. Remove the electrical connector (2) from the power mirror switch (9).
3. Release the clip that retains the power mirror switch (9) to the front door trim plate (1).
4. Remove the power mirror switch (9) from the front door trim plate (1).
Installation Procedure
1. Install the power mirror switch (9) to the front door trim plate (1).
2. Press the power mirror switch (9) towards the front door in order to engage the retaining tabs to the front door trim plate (1).
3. Install the electrical connector (2) to the power mirror switch (9).
4. Install the front door trim plate (1). Refer to Front Door Trim Plate Replacement Front Door Trim Plate Replacement.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.