Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012CRUZE L4-1.8LREPAIR AND DIAGNOSISWIPER AND WASHER SYSTEMSWIPER ARMADJUSTMENTS
2012 Chevrolet Cruze L4-1.8L
Wiper Arm: Adjustments
2012 Chevrolet Cruze L4-1.8LSECTION Adjustments
Windshield Wiper Arm Adjustment
1. Loosen the windshield wiper arms from windshield wiper transmission. Refer to Windshield Wiper Arm Replacement Service and Repair
2. Measure the upper edge of water deflector (rubber lip) to wiper arm attachment point.
3. Position the wiper arm to the basic setting.
* Driver side (a) approximately 6.5 cm (2.6 in)
* Passenger side (b) approximately 8.5 cm (3.3 in).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.