Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012CORVETTE V8-6.2L SCREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGAIR DOORSERVICE AND REPAIRRECIRCULATION DOOR REPLACEMENT
2012 Chevrolet Corvette V8-6.2L SC
Recirculation Door Replacement
2012 Chevrolet Corvette V8-6.2L SCSECTION Recirculation Door Replacement
Recirculation Door Replacement
Removal Procedure
1. Remove the air inlet assembly. Refer to Air Inlet Assembly Replacement Air Inlet Assembly Replacement.
2. Disconnect and remove the recirculation door from the air inlet housing.
Installation Procedure
1. Install the recirculation door to the air inlet housing.
2. Install the air inlet assembly. Refer to Air Inlet Assembly Replacement Air Inlet Assembly Replacement.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.