Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012COLORADO 2WD L4-2.9LREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLDISC BRAKE SYSTEMSERVICE AND REPAIRFRONT BRAKE SHIELD REPLACEMENT
2012 Chevrolet Colorado 2WD L4-2.9L
Front Brake Shield Replacement
2012 Chevrolet Colorado 2WD L4-2.9LSECTION Front Brake Shield Replacement
Front Brake Shield Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning Brake Dust Warning.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Service and Repair.
3. Remove the wheel hub and bearing assembly. Refer to Front Wheel Bearing and Hub Replacement Service and Repair.
4. Remove the front brake shield.
5. Remove any debris or corrosion from the front brake shield, wheel hub and steering knuckle mating surfaces.
Installation Procedure
1. Install the front brake shield.
2. Install the wheel hub and bearing assembly. Refer to Front Wheel Bearing and Hub Replacement Service and Repair.
3. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Service and Repair.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.