Seats: Adjustments

2011 Chevrolet Traverse FWD V6-3.6LSECTION Adjustments



Rear Seat Adjuster Track Adjustment

Inspection and Cleaning Procedure

1. Remove the rear seat. Refer to Rear Seat Replacement Rear Seat Replacement.
2. Inspect the seat track for debris or foreign materials, if the track needs to be cleaned, perform the following steps:

Warning: Refer to Safety Glasses and Compressed Air Warning (Safety Glasses and Compressed Air Warning).


Note: Use care when using compressed air to clear the sunroof drain hose. Do not exceed 241 kPa (35 psi).

* Use a flexible wire or 689 kPa (100 psi) of compressed air to clear any material plugging the obstructing the seat track.
* The mechanical components of the seat track assembly receive lubrication during assembly. If any seat track needs additional lubrication, use multi-purpose lubricant GM P/N 12346241 (Canadian P/N 10953474) or equivalent.

3. Install the rear seat and test for proper operation. Refer to Rear Seat Replacement Rear Seat Replacement.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.