Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE 2WD V8-6.0L HYBRIDREPAIR AND DIAGNOSISDIAGRAMSEXPLODED VIEWSAUTOMATIC TRANSMISSION/TRANSAXLE2ML70 - AUTOMATIC TRANSMISSIONDISASSEMBLED VIEWSINPUT HOUSING MODULE AND PUMP ASSEMBLY
2011 Chevrolet Tahoe 2WD V8-6.0L Hybrid
Input Housing Module and Pump Assembly
2011 Chevrolet Tahoe 2WD V8-6.0L HybridSECTION Input Housing Module and Pump Assembly
Disassembled Views
Input Housing Module and Pump Assembly
200 - A/Trans Torque Dampener Fluid Seal Retaining Ring
201 - A/Trans Fluid Pump Seal
202 - A/Trans Torque Dampener (w/Fluid Pump) Housing Assembly
203 - Input Shaft Bushing
204 - A/Trans Fluid Pump Slide O-Ring Seal
205 - A/Trans Fluid Pump Slide Seal Support
206 - A/Trans Fluid Pump Slide Seal
207 - A/Trans Fluid Pump Slide Outer Spring
208 - A/Trans Fluid Pump Slide
209 - A/Trans Fluid Pump Slide Pivot Pin
210 - A/Trans Fluid Pump Vane Ring
211 - A/Trans Fluid Pump Rotor Guide
212 - A/Trans Fluid Pump Vane
213 - A/Trans Fluid Pump Rotor
214 - Pump Slide Fluid Seal Ring
215 - A/Trans Fluid Pump Air Bleed Orifice
216 - A/Trans Torque Dampener Fluid Passage Plug
217 - Pressure Regulator Valve Pin
218 - Valve Retaining Plug
219 - Isolator Valve
220 - A/Trans Fluid Pump Valve Inner Spring
221 - A/Trans Fluid Pump and Auxiliary Fluid Pump Valve
222 - Pressure Relief Ball Valve Spring Pin
223 - Pressure Relief Ball Valve Spring
224 - Pressure Relief Ball Valve
225 - A/Trans Fluid Cooler Bypass Valve
226 - A/Trans Fluid Cooler Bypass Valve Spring
227 - Decrease Orifice
228 - A/Trans Fluid Pump Cover Bolt
229 - A/Trans Fluid Pump Cover Assembly
230 - Transmission Lube Fluid Pressure Regulator Valve
231 - Pressure Regulator Valve Spring
232 - Pressure Regulator Valve Stop
233 - Pressure Regulator Valve
234 - Pressure Regulator Valve Inner Spring
235 - Pressure Regulator Valve Outer Spring
236 - Isolator Valve
237 - Isolator Valve Sleeve
238 - Transmission Fluid Cooler Pipe Fitting Seal
239 - A/Trans Fluid Pump Valve Outer Spring
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.