Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2010TRAVERSE AWD V6-3.6LREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINETIMING COMPONENTSTIMING CHAIN GUIDESERVICE AND REPAIRSECONDARY TIMING CHAIN GUIDE REPLACEMENT - RIGHT SIDE
2010 Chevrolet Traverse AWD V6-3.6L
Secondary Timing Chain Guide Replacement - Right Side
2010 Chevrolet Traverse AWD V6-3.6LSECTION Secondary Timing Chain Guide Replacement - Right Side
Secondary Timing Chain Guide Replacement - Right Side
Removal Procedure
1. Remove the engine front cover. Refer to Engine Front Cover Replacement (Service and Repair).
2. Remove the spark plugs in order to ease crankshaft/engine rotation. Refer to Spark Plug Replacement (Service and Repair).
3. Remove the right bank secondary camshaft drive chain tensioner. Refer to Secondary Timing Chain Tensioner Removal - Right Side (16. Secondary Timing Chain Tensioner Removal - Right Side).
4. Remove the right bank secondary camshaft drive chain guide. Refer to Secondary Timing Chain Guide Removal - Right Side (18. Secondary Timing Chain Guide Removal - Right Side).
Installation Procedure
1. Install the right bank secondary camshaft drive chain guide. Refer to Secondary Timing Chain Guide Installation - Right Side (123. Secondary Timing Chain Guide Installation - Right Side).
2. Install the right bank secondary camshaft drive chain tensioner. Refer to Secondary Timing Chain Tensioner Installation - Right Side (125. Secondary Timing Chain Tensioner Installation - Right Side).
3. Install the engine front cover. Refer to Engine Front Cover Replacement (Service and Repair).
4. Install the spark plugs. Refer to Spark Plug Replacement (Service and Repair).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.