Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2010TRAVERSE AWD V6-3.6LREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINECYLINDER BLOCK ASSEMBLYPISTONSPECIFICATIONS
2010 Chevrolet Traverse AWD V6-3.6L
Piston: Specifications
2010 Chevrolet Traverse AWD V6-3.6LSECTION Specifications
Piston Diameter
Measured Over Skirt Coating 93.976-94.014 mm (3.6998-3.7013 in)
Service Limit Minimum w/more than 10K miles 93.926 mm (3.6979 in)
Piston to Bore Clearance
Production; Measured at Skirt Coating 0.022-0.032 mm (0.0008-0.0013 in)
Service Limit Maximum, w/more than 10k miles 0.650 mm (0.0256 in)
Measured Over Skirt Coating 93.976-94.014 mm (3.6998-3.7013 in)
Service Limit Minimum w/more than 10K miles 93.926 mm (3.6979 in)
Piston to Bore Clearance
Production; Measured at Skirt Coating 0.022-0.032 mm (0.0008-0.0013 in)
Service Limit Maximum, w/more than 10k miles 0.650 mm (0.0256 in)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.