Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2010TAHOE 4WD V8-6.0L HYBRIDREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSPOWER WINDOW SWITCHLOCATIONS
2010 Chevrolet Tahoe 4WD V8-6.0L Hybrid
Power Window Switch: Locations
2010 Chevrolet Tahoe 4WD V8-6.0L HybridSECTION Locations
Door Component Views
Driver Door Components
1 - Outside Rearview Mirror - Driver
2 - Memory/Heated Seat Switch - Driver (KB6)
3 - Door Lock/Window Switch - Driver
4 - Outside Rearview Mirror Switch
5 - Window Switches
6 - Window Lock-Out Switch
7 - Door Lock Switch
8 - Speaker - Left Front
9 - Window Motor - Driver
10 - Inflatable Restraint Side Impact Sensor (SIS) - Left Front (ASF)
11 - Door Latch - Driver
12 - Door Courtesy Lamp - Driver (Z75)
Passenger Door Components
1 - Outside Rearview Mirror - Passenger
2 - Door Lock/Window Switch - Passenger
3 - Door Latch - Passenger
4 - Inflatable Restraint Side Impact Sensor (SIS) - Right Front (ASF)
5 - Door Courtesy Lamp - Passenger (Z75)
6 - Speaker - Right Front
7 - Window Motor - Passenger
8 - Heated Seat Switch - Passenger (AN3 or KA1, without KB6)
Left Rear Door Components
1 - Window Switch - Left Rear
2 - Window Motor - Left Rear
3 - Speaker - Left Rear
4 - Inflatable Restraint Side Impact Sensor (SIS) - Left Rear (ASF)
5 - Door Latch - Left Rear
Right Rear Door Components
1 - Window Switch - Right Rear
2 - Door Latch - Right Rear
3 - Inflatable Restraint Side Impact Sensor (SIS) - Right Rear (ASF)
4 - Speaker - Right Rear
5 - Window Motor - Right Rear
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.