Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2010SILVERADO 1500 4WD V8-6.0LREPAIR AND DIAGNOSISDIAGRAMSCONNECTOR VIEWSPOWER WINDOW SWITCH
2010 Chevrolet Silverado 1500 4WD V8-6.0L
Power Window Switch
2010 Chevrolet Silverado 1500 4WD V8-6.0LSECTION Power Window Switch
Component Connector End Views
Door Lock Switch - Driver (AU3 without AN3 or DL3)
Door Lock Switch - Passenger (AU3 without AN3 or DL3)
Door Lock/Window Switch - Driver X1 (AN3 or DL3)
Door Lock/Window Switch - Driver X2 (AN3 or DL3)
Door Lock/Window Switch - Driver X3 (AN3 or DL3)
Door Lock/Window Switch - Driver X4 (AN3)
Door Lock/Window Switch - Driver X7 (AN3 or DL3)
Door Lock/Window Switch - Passenger X1 (AN3 or DL3)
Door Lock/Window Switch - Passenger X2 (AN3 or DL3)
Door Lock/Window Switch - Passenger X3 (AN3 or DL3)
Door Lock/Window Switch - Passenger X4 (AN3)
Door Lock/Window Switch - Passenger X7 (AN3 or DL3)
Sliding Rear Window Switch (A48)
Window Switch - Driver X1 (A31 without AN3 or DL3)
Window Switch - Driver X2 (A31 without AN3 or DL3)
Window Switch - Left Rear (Crew Cab with A31 or Extended Cab with ABV)
Window Switch - Passenger (A31 without AN3 or DL3)
Window Switch - Right Rear (Crew Cab with A31 or Extended Cab with ABV)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.