Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2010MALIBU L4-2.4L HYBRIDREPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSAUTOMATIC TRANSMISSION/TRANSAXLESYSTEM SPECIFICATIONS
2010 Chevrolet Malibu L4-2.4L Hybrid
System Specifications
2010 Chevrolet Malibu L4-2.4L HybridSECTION System Specifications
TRANSMISSION FLUID CAPACITY
4T45-E
Bottom Pan Removal 6.6 liters (7.0 quarts)
Complete Overhaul 9.0 liters (9.5 quarts)
Dry 12.2 liters (12.9 quarts)
6T40 / 6T45
Valve Body Cover Removal 5.0-7.0 liters (5.3-7.4 quarts)
Fluid Change - Drain Plug 4.0-6.0 liters (4.2- 6.3 quarts)
Overhaul 8.0-8.5 liters (8.5-9.0 quarts)
6T70 / 6T75
Valve Body Cover Removal 5.0-7.0 liters (5.3-7.4 quarts)
Fluid Change - Drain Plug 4.0-6.0 liters (4.2- 6.3 quarts)
Overhaul 7.0-9.0 liters (7.4-9.5 quarts)
NOTE: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck fluid level after filling.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.