Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2010COLORADO 2WD L5-3.7LREPAIR AND DIAGNOSISRESTRAINTS AND SAFETY SYSTEMSRELAYS AND MODULES - RESTRAINTS AND SAFETY SYSTEMSAIR BAG CONTROL MODULELOCATIONS
2010 Chevrolet Colorado 2WD L5-3.7L
Air Bag Control Module: Locations
2010 Chevrolet Colorado 2WD L5-3.7LSECTION Locations
Harness Routing Views
Body Harness Routing 2 of 3 (Regular Cab)
1 - Body Control Module (BCM) X1
2 - X201
3 - G301
4 - G302
5 - Cargo Lamp/Center High Mounted Stop Lamp (CHMSL)
6 - Door Jamb Switch - Front Passenger
7 - X313
8 - Seat Belt Pretensioner - Right Front
9 - Inflatable Restraint Sensing and Diagnostic Module (SDM)
10 - Transfer Case Shift Control Module
11 - X314
12 - G Sensor
13 - Seat Belt Pretensioner - Left Front
14 - Door Jamb Switch - Driver
15 - G300
16 - Stop Lamp Switch
17 - TCC Brake/Cruise Release Switch
18 - Park Brake Switch
19 - J303
20 - Clutch Switch
21 - Clutch Start Switch
22 - X208
23 - X500
24 - X501 (AU3 and A31)
25 - X200
26 - X275
27 - Inflatable Restraint Roof Rail Module - Left
28 - Accelerator Pedal Position (APP) Sensor
29 - X310
30 - X600 and X601 (AU3 and A31)
31 - Inflatable Restraint Roof Rail Module - Right
32 - Inside Rearview Mirror
Body Harness Routing 2 of 3 (Extended Cab)
1 - X310
2 - X201
3 - G301
4 - G302
5 - Inflatable Restraint Sensing and Diagnostic Module (SDM)
6 - X313
7 - X801
8 - X800
9 - Cargo Lamp/Center High Mounted Stop Lamp (CHMSL)
10 - X700
11 - X701
12 - X314
13 - Transfer Case Shift Control Module X1
14 - Transfer Case Shift Control Module X2
15 - G Sensor
16 - G300
17 - Accelerator Pedal position (APP) Sensor
18 - J102
19 - J100
20 - Stop Lamp Switch
21 - TCC Brake/Cruise Release Switch
22 - Park Brake Switch
23 - Clutch Switch
24 - Inflatable Restraint Roof Rail Module - Right
25 - X501 (AU3 and A31)
26 - X500
27 - X200
28 - X275
29 - Clutch Start Switch (MA5)
30 - Body Control Module (BCM) X1
31 - X601 (AU3 and A31)
32 - X600
33 - Inside Rearview Mirror
Body Harness Routing 2 of 3 (Crew Cab)
1 - Body Control Module (BCM) X1
2 - X201
3 - G301
4 - G302
5 - Inflatable Restraint Sensing and Diagnostic Module (SDM)
6 - X800
7 - Cargo Lamp/Center High Mounted Stop Lamp (CHMSL)
8 - Door Jamb Switch - Front Passenger
9 - Seat Belt Pretensioner - Right Front
10 - Door Jamb Switch - Right Rear
11 - X313
12 - X700
13 - X314
14 - Seat Belt Pretensioner - Left Front
15 - Door Jamb Switch - Left Rear
16 - Door Jamb Switch - Driver
17 - Transfer Case Shift Control Module X1 and X2
18 - G Sensor
19 - G300
20 - Stop Lamp Switch
21 - TCC Brake/Cruise Release Switch
22 - Park Brake Switch
23 - J303
24 - Clutch Switch
25 - Clutch Start Switch
26 - X208
27 - X500
28 - X501
29 - X200
30 - X275
31 - Inflatable Restraint Roof Rail Module - Left
32 - Accelerator Pedal Position (APP) Sensor
33 - X310
34 - X600 and X601 (AU3 and A31)
35 - Inflatable Restraint Roof Rail Module - Right
36 - Inside Rearview Mirror
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.