Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009TRAVERSE AWD V6-3.6LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKES AND TRACTION CONTROLDISC BRAKE SYSTEMBRAKE ROTOR/DISC
2009 Chevrolet Traverse AWD V6-3.6L
Brake Rotor/Disc
2009 Chevrolet Traverse AWD V6-3.6LSECTION Brake Rotor/Disc
FRONT BRAKE
Minimum Thickness 27.5 mm 1.08 in
Thickness Variation 0.025 mm 0.001 in
Runout 0.06 mm 0.002 in
REAR BRAKE
Minimum Thickness 18.4 mm 0.72 in
Thickness Variation 0.025 mm 0.001 in
Runout 0.06 mm 0.002 in
Minimum Thickness 27.5 mm 1.08 in
Thickness Variation 0.025 mm 0.001 in
Runout 0.06 mm 0.002 in
REAR BRAKE
Minimum Thickness 18.4 mm 0.72 in
Thickness Variation 0.025 mm 0.001 in
Runout 0.06 mm 0.002 in
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.