Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Navigation Radio - Problems After Radio/Battery Service
2009 Chevrolet Traverse AWD V6-3.6LSECTION Navigation Radio - Problems After Radio/Battery Service
INFORMATION
Bulletin No.: 08-08-44-023A
Date: May 23, 2011
Subject: Information on Navigation Radio Not Displaying Accurate Vehicle Location after Radio Replacement, Power Loss or Battery Replacement
Models:
2012 and Prior GM Passenger Cars and Trucks
Equipped with Navigation Radio
Supercede:
This bulletin is being revised to update model years. Please discard Corporate Bulletin Number 08-08-44-023 (Section 08 - Body and Accessories).
The purpose of this bulletin is to inform technicians and customers that the Navigation Radio may not display the vehicle location icon on the map accurately after a radio or battery has been replaced or after battery power has been removed from the radio. The vehicle location icon accuracy may be degraded if the GPS signal is not available and the GPS displayed icon has a red line through it.
The Navigation Radio does not keep learned GPS information or gyroscope and vehicle speed signals stored when the battery power is removed from the radio. The Navigation radio continually uses GPS, gyroscope and vehicle speed data to maintain the vehicle location icon positioned accurately on the displayed map. There may be periods of time during a drive cycle when the GPS signal may not be available and the vehicle location icon still appears to be accurate. This is due to the radio having internal gyroscopes and receiving a vehicle speed signal to maintain accuracy if the radio had received a good GPS signal earlier in the drive cycle.
Normal driving will improve the accuracy of the vehicle location icon on the displayed map. It may be necessary for the vehicle to be driven up to 40 km (25 mi) with 15 left and 15 right turns while the vehicle location icon is matched to roads on the displayed map. Do not replace the radio for this condition.
Disclaimer
Bulletin No.: 08-08-44-023A
Date: May 23, 2011
Subject: Information on Navigation Radio Not Displaying Accurate Vehicle Location after Radio Replacement, Power Loss or Battery Replacement
Models:
2012 and Prior GM Passenger Cars and Trucks
Equipped with Navigation Radio
Supercede:
This bulletin is being revised to update model years. Please discard Corporate Bulletin Number 08-08-44-023 (Section 08 - Body and Accessories).
The purpose of this bulletin is to inform technicians and customers that the Navigation Radio may not display the vehicle location icon on the map accurately after a radio or battery has been replaced or after battery power has been removed from the radio. The vehicle location icon accuracy may be degraded if the GPS signal is not available and the GPS displayed icon has a red line through it.
The Navigation Radio does not keep learned GPS information or gyroscope and vehicle speed signals stored when the battery power is removed from the radio. The Navigation radio continually uses GPS, gyroscope and vehicle speed data to maintain the vehicle location icon positioned accurately on the displayed map. There may be periods of time during a drive cycle when the GPS signal may not be available and the vehicle location icon still appears to be accurate. This is due to the radio having internal gyroscopes and receiving a vehicle speed signal to maintain accuracy if the radio had received a good GPS signal earlier in the drive cycle.
Normal driving will improve the accuracy of the vehicle location icon on the displayed map. It may be necessary for the vehicle to be driven up to 40 km (25 mi) with 15 left and 15 right turns while the vehicle location icon is matched to roads on the displayed map. Do not replace the radio for this condition.
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.