Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009SILVERADO 3500 2WD V8-6.0LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEINTAKE MANIFOLD
2009 Chevrolet Silverado 3500 2WD V8-6.0L
Intake Manifold
2009 Chevrolet Silverado 3500 2WD V8-6.0LSECTION Intake Manifold
Intake Manifold Bolts - First Pass in Sequence 5 Nm (44 lb in)
Intake Manifold Bolts - Final Pass in Sequence 10 Nm (89 lb in)
Intake Manifold Sight Shield Retainer Bolts 5 Nm (44 lb in)
J 41798 M8 Bolt 25 Nm (18 lb ft)
J 41798 M10 Bolts 50 Nm (37 lb ft)
Throttle Body Bolts 10 Nm (89 lb in)
Throttle Body Nuts 10 Nm (89 lb in)
Throttle Body Studs 6 Nm (53 lb in)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.