Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009MALIBU V6-3.6LREPAIR AND DIAGNOSISSTARTING AND CHARGINGBATTERYSPECIFICATIONSPARASITIC DRAW
2009 Chevrolet Malibu V6-3.6L
Parasitic Draw
2009 Chevrolet Malibu V6-3.6LSECTION Parasitic Draw
Record the current reading. The current reading should be less than 250 mA.
Wait 20 minutes. The current reading should be less than 80 mA.
Remove the 30A IBCM 1 fuse 20 from the underhood fuse block. The current reading should be less than 30 mA.
Wait 20 minutes. The current reading should be less than 80 mA.
Remove the 30A IBCM 1 fuse 20 from the underhood fuse block. The current reading should be less than 30 mA.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.