Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009IMPALA V8-5.3LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSEXHAUST SYSTEMEXHAUST MANIFOLD
2009 Chevrolet Impala V8-5.3L
Exhaust Manifold
2009 Chevrolet Impala V8-5.3LSECTION Exhaust Manifold
EXHAUST MANIFOLD (LEFT AND RIGHT)
Exhaust Manifold Bolts
First Pass 15 Nm (11 lb ft)
Final Pass 20 Nm (15 lb ft)
Exhaust Manifold Studs 20 Nm (15 lb ft)
Exhaust Manifold Bolts
First Pass 15 Nm (11 lb ft)
Final Pass 20 Nm (15 lb ft)
Exhaust Manifold Studs 20 Nm (15 lb ft)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.