Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009IMPALA V6-3.9LREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINEINTAKE MANIFOLDSERVICE AND REPAIRINTAKE MANIFOLD COVER REPLACEMENT
2009 Chevrolet Impala V6-3.9L
Intake Manifold Cover Replacement
2009 Chevrolet Impala V6-3.9LSECTION Intake Manifold Cover Replacement
Intake Manifold Cover Replacement
Removal Procedure
1. Remove the engine oil fill cap.
2. Pull up on the cover in order to disengage the cover from the studs.
Installation Procedure
1. Align the cover to the studs on the engine. Push down on the cover above the studs in order to engage the cover to the studs.
2. Install the engine oil fill cap.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.