Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009IMPALA V6-3.5LREPAIR AND DIAGNOSISBODY AND FRAMESEATSPOWER SEAT SWITCHLOCATIONS
2009 Chevrolet Impala V6-3.5L
Power Seat Switch: Locations
2009 Chevrolet Impala V6-3.5LSECTION Locations
Passenger Compartment/Roof Component Views
Driver Seat Components
1 - Seat Recline Motor - Driver (AH5)
2 - Heated Seat Element - Driver - Back (KA1)
3 - Seat Adjuster Switch - Driver
4 - Heated Seat Control Module (KA1)
5 - Horizontal Motor (Part of the Seat Adjuster Motor Assembly - Driver)
6 - Front Vertical Motor (Part of the Seat Adjuster Motor Assembly - Driver)
7 - Rear Vertical Motor (Part of the Seat Adjuster Motor Assembly - Driver)
8 - Heated Seat Element - Driver - Seat (KA1)
Passenger Seat Components
1 - Heated Seat Element - Passenger - Back (KA1)
2 - Seat Belt Switch - Passenger
3 - Seat Belt Tension Sensor - Passenger
4 - Seat Belt Tension Sensor - Passenger, Connector
5 - Rear Vertical Motor (Part of the Seat Adjuster Motor Assembly - Passenger)
6 - Front Vertical Motor (Part of the Seat Adjuster Motor Assembly - Passenger)
7 - Horizontal Motor (Part of the Seat Adjuster Motor Assembly - Passenger)
8 - Inflatable Restraint Front Passenger Presence System (PPS) Module
9 - Inflatable Restraint Front Passenger Presence System (PPS) Sensor
10 - Seat Adjuster Switch - Passenger (AG2)
11 - Heated Seat Element - Passenger - Seat (KA1)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.