Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009CORVETTE V8-6.2LREPAIR AND DIAGNOSISWIPER AND WASHER SYSTEMSWIPER BLADETESTING AND INSPECTION
2009 Chevrolet Corvette V8-6.2L
Wiper Blade: Testing and Inspection
2009 Chevrolet Corvette V8-6.2LSECTION Testing and Inspection
Wiper Blade Element Check
Remove the wiper blade from the arm. Refer to Windshield Wiper Blade Replacement (Windshield Wiper Blade Replacement).
Look down the length of the wiper blade element. The rubber part of the wiper blade element (2) that contacts the glass must be on the center line of the wiper blade plus or minus 15 degrees (1).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.