Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009COBALT L4-2.2LREPAIR AND DIAGNOSISMAINTENANCEFUSES AND CIRCUIT BREAKERSFUSE BLOCKLOCATIONS
2009 Chevrolet Cobalt L4-2.2L
Fuse Block: Locations
2009 Chevrolet Cobalt L4-2.2LSECTION Locations
Harness Routing Views
Forward Lamp Harness
1 - X121
2 - G102
3 - Fuse Block - Underhood X3
4 - Inflatable Restraint Front End Sensor Connector
5 - Front Fascia
6 - Fog Lamp - Right
7 - Fog Lamp - Left
8 - G101
Forward Lamp Harness Routing
1 - Headlamp Assembly - Right Front
2 - X110
3 - Fog Lamp - Right (T37)
4 - X121
5 - Fuse Block - Underhood X3
6 - G101
7 - G102
8 - X111
9 - Headlamp Assembly - Left Front
Engine Harness Routing - L61
1 - Electronic Power Steering (EPS) Harness
2 - G109
3 - Fuse Block - Underhood
4 - G103
5 - Battery Cable Harness
6 - X100
7 - G105
8 - G111
9 - X160
Engine Harness Routing (LAP)
1 - Electronic Power Steering (EPS) Harness
2 - G109
3 - Fuse Block - Underhood
4 - G103
5 - Battery Cable Harness
6 - X100 (MN5 without MXO)
7 - G105
8 - G111
9 - X160
Body Harness - Engine Compartment
1 - X101
2 - Windshield Wiper Module Connector
3 - Fuse Block - Underhood X4
4 - Fuse Block - Underhood X2
5 - G101
6 - X121
7 - Engine Control Module (ECM) X1
8 - Electronic Brake Control Module (EBCM) Connector
9 - Fuse Block - Underhood X5
Forward Lamp Harness Routing
1 - Headlamp Assembly - Right Front
2 - X110
3 - Fog Lamp - Right (T37)
4 - X121
5 - Fuse Block - Underhood X3
6 - G101
7 - G102
8 - X111
9 - Headlamp Assembly - Left Front
Forward Lamp Harness
1 - X121
2 - G102
3 - Fuse Block - Underhood X3
4 - Inflatable Restraint Front End Sensor Connector
5 - Front Fascia
6 - Fog Lamp - Right
7 - Fog Lamp - Left
8 - G101
Body Harness - Engine Compartment
1 - X101
2 - Windshield Wiper Module Connector
3 - Fuse Block - Underhood X4
4 - Fuse Block - Underhood X2
5 - G101
6 - X121
7 - Engine Control Module (ECM) X1
8 - Electronic Brake Control Module (EBCM) Connector
9 - Fuse Block - Underhood X5
Fuel Injector Harness Ground
1 - Fuse Block - Underhood
2 - G107
Fuse Block - Underhood
1 - Fuse Block - Underhood
2 - Fuse Block Cover
3 - G101
4 - Bracket Assembly
Engine Harness Routing - L61
1 - Electronic Power Steering (EPS) Harness
2 - G109
3 - Fuse Block - Underhood
4 - G103
5 - Battery Cable Harness
6 - X100
7 - G105
8 - G111
9 - X160
Engine Harness Routing (LAP)
1 - Electronic Power Steering (EPS) Harness
2 - G109
3 - Fuse Block - Underhood
4 - G103
5 - Battery Cable Harness
6 - X100 (MN5 without MXO)
7 - G105
8 - G111
9 - X160
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.