Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008TAHOE 4WD V8-6.0L HYBRIDREPAIR AND DIAGNOSISTESTING AND INSPECTIONPROGRAMMING AND RELEARNINGSUSPENSION POSITION CALIBRATIONAUTOMATIC LEVEL CONTROL
2008 Chevrolet Tahoe 4WD V8-6.0L Hybrid
Automatic Level Control
2008 Chevrolet Tahoe 4WD V8-6.0L HybridSECTION Automatic Level Control
Suspension Position Calibration
Automatic Level Control (ALC) Trimset Procedure
If the system is functioning abnormally, performing the ALC Trimset recalibration procedure may correct the condition. When a system component has been replaced, ALC Trimset calibration must be performed. In the scan tool Special Functions menu, select ALC Trimset and follow the screen prompts to perform the procedure. Once the process has been completed, the system should be fully functional.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.