Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008MALIBU L4-2.4L HYBRIDREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON PIN, ENGINE
2008 Chevrolet Malibu L4-2.4L Hybrid
Piston Pin, Engine
2008 Chevrolet Malibu L4-2.4L HybridSECTION Piston Pin, Engine
Pin - Piston Pin Clearance to Connecting Rod Bore 0.007-0.026 mm (0.0003-0.0010 in)
Pin - Piston Pin Clearance to Piston Pin Bore 0.004-0.014 mm (0.0002-0.0006 in)
Pin - Piston Pin Diameter 19.995-20.000 mm (0.7872-0.7874 in)
Pin - Piston Pin End Play 0.410-1.266 mm (0.0161-0.0498 in)
Pin - Piston Pin Clearance to Piston Pin Bore 0.004-0.014 mm (0.0002-0.0006 in)
Pin - Piston Pin Diameter 19.995-20.000 mm (0.7872-0.7874 in)
Pin - Piston Pin End Play 0.410-1.266 mm (0.0161-0.0498 in)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.