Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008HHR L4-2.4LREPAIR AND DIAGNOSISLIGHTING AND HORNSDIMMER SWITCHLOCATIONS
2008 Chevrolet HHR L4-2.4L
Dimmer Switch: Locations
2008 Chevrolet HHR L4-2.4LSECTION Locations
Instrument Panel
1 - Instrument Panel Cluster (IPC)
2 - Ambient Light Sensor
3 - Hazard Switch
4 - Fog Lamp Switch (T37)
5 - I/P Compartment
6 - Radio
7 - HVAC Control Assembly
8 - Cigar Lighter (DT4)/Power Outlet (- DT4)
9 - Master Window Switch
10 - Rear Wiper/Washer Switch
11 - Inflatable Restraint Passenger Air Bag ON/OFF Indicator
12 - Instrument Panel (I/P) Dimmer Switch
Instrument Panel (I/P) Components
1 - Ambient Light Sensor
2 - Hazard Switch
3 - Inflatable Restraint I/P Module
4 - Passenger Rear Access Panel Switch - Right Rear Panel (Panel Van)
5 - Fog Lamp Switch (T37)
6 - Radio/Navigation Unit
7 - HVAC Control Assembly
8 - Cigar Lighter (DT4)/Power Outlet (- DT4)
9 - Window Switch - Front Passenger/Window Switch - Right Rear
10 - Master Window Switch
11 - Rear Wiper/Washer Switch
12 - Inflatable Restraint Passenger Airbag ON/OFF Indicator
13 - I/P Dimmer Switch
14 - Steering Wheel Controls - Right (UK3)
15 - Steering Wheel Controls - Left
16 - Driver Rear Access Panel Switch - Left Rear Panel (Panel Van)
17 - Driver Rear Access Panel Switch - Right Rear Panel (Panel Van)
18 - Turn Signal/Multifunction Switch
19 - Inflatable Restraint Steering Wheel Module
20 - Instrument Panel Cluster (IPC)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.