Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008EXPRESS 2500 V8-4.8LREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSSERVICE AND REPAIRSLIDING DOOR WINDOW WEATHERSTRIP REPLACEMENT
2008 Chevrolet Express 2500 V8-4.8L
Sliding Door Window Weatherstrip Replacement
2008 Chevrolet Express 2500 V8-4.8LSECTION Sliding Door Window Weatherstrip Replacement
Sliding Door Window Weatherstrip Replacement
Removal Procedure
1. Remove the sliding side door upper trim panel.
2. Remove the hinged body side window.
3. Pull the sliding side door window weatherstrip from the window opening pinch-weld flange.
4. Remove the sliding side door window weatherstrip from the vehicle.
Installation Procedure
1. Install the sliding side door window weatherstrip to the vehicle.
2. Align the channel on the sliding side door window weatherstrip with the pinch-weld flange.
3. Press the weatherstrip into place.
4. Install the hinged body side window.
5. Install the sliding side door upper trim panel.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.