Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008EXPRESS 2500 V8-4.8LREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCOMPRESSOR HVACSERVICE AND REPAIRAIR CONDITIONING COMPRESSOR MOUNTING BRACKET REPLACEMENT
2008 Chevrolet Express 2500 V8-4.8L
Air Conditioning Compressor Mounting Bracket Replacement
2008 Chevrolet Express 2500 V8-4.8LSECTION Air Conditioning Compressor Mounting Bracket Replacement
Compressor Mounting Bracket Replacement
Removal Procedure
1. Remove the compressor.
2. Remove the compressor mounting bracket bolts (3).
3. Remove the compressor mounting bracket (2).
Installation Procedure
1. Install the compressor mounting bracket (2).
Notice: Refer to Fastener Notice.
2. Install the compressor mounting bracket bolts (3).
Tighten the bolts to 50 N.m (37 lb ft).
3. Install the compressor.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.