Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008EXPRESS 2500 V8-4.8LREPAIR AND DIAGNOSISBODY AND FRAMESEATSSERVICE AND REPAIRFRONT SEAT ARMREST REPLACEMENT
2008 Chevrolet Express 2500 V8-4.8L
Front Seat Armrest Replacement
2008 Chevrolet Express 2500 V8-4.8LSECTION Front Seat Armrest Replacement
Front Seat Armrest Replacement
Removal Procedure
1. Release the bottom edge of the seatback cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement.
2. Use a small bladed tool in order to release the clip (1) that retains the armrest to the seatback (2).
3. Pull the armrest (3) from the seatback.
Installation Procedure
1. Install the retaining clip (1) to the seatback (2).
2. Ensure that the retaining clip is fully seated.
3. Install the armrest (3) to the seatback.
4. Press on the armrest in order to engage the armrest with the retaining clip in the seatback.
5. Secure the bottom edge of the seatback cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.