Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008EXPRESS 2500 V8-4.8LREPAIR AND DIAGNOSISBODY AND FRAMEFENDERFRONT FENDERSERVICE AND REPAIRFRONT FENDER EXTENSION REPLACEMENT
2008 Chevrolet Express 2500 V8-4.8L
Front Fender Extension Replacement
2008 Chevrolet Express 2500 V8-4.8LSECTION Front Fender Extension Replacement
Front Fender Extension Replacement
Removal Procedure
1. Remove the bolt (2) retaining the front fender extension (3) to the body.
2. Remove the bolt (2) retaining the front fender extension (3) to the rocker panel.
3. Remove the front fender extension (3) from the body.
Installation Procedure
1. Install the front fender extension (3) to the body.
Notice: Refer to Fastener Notice.
2. Install the bolts (2) in order to retain the front fender extension (3) to the body.
Tighten the bolts to 11 N.m (97 lb in).
3. Install the bolt in order to retain the front fender extension to the rocker panel.
Tighten the bolt to the rocker panel to 2 N.m (18 lb in).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.