Parts Information

2007 Chevrolet Uplander V6-3.9LSECTION Parts Information
PartManufacturerOEM Part #PriceNotes
Input Clutch
Bushing
     Part Of Input Shaft.
Check ValveGMO86621787.51
Input ShaftGMO24236214379.74
Inner Seal
     Part Of Input Shaft.
Housing
3RD Clutch HousingGMO2420586448.77
Clutch Piston
Input Clutch PistonGMO2420347951.16
3RD Clutch PistonGMO2420537813.23
Clutch Spring
Input Clutch Spring
     Part Of Piston Housing.
3RD Clutch SpringGMO2420335915.21
Outer Seal
     Part Of Input Shaft.
Seal
Part of Seal Kit.GMO2421130024.39
GMO2421130024.39
Snap RingGMO86447268.28
GMO86310288.00
GMO86441658.28
Clutch Plate
Input Clutch Apply PlateGMO868280148.77
GMO865814629.33
Input Clutch Plate-SteelGMO86830849.79
Input Clutch Plate-FiberGMO242165025.15
Backing PlateGMO865808315.86
Thrust BearingGMO866842215.93
Waved Clutch Plate
3RD Clutch Plate-WavedGMO242089188.28
Input Clutch Plate-WavedGMO86752578.28
Clutch Plates
3RD Clutch Plates-External SplinesGMO242162888.20
3RD Clutch Plates-Internal SplinesGMO242162878.20
RetainerGMONOT LISTED0.00
Sprag AssemblyGMONOT LISTED0.00
SpacerGMONOT LISTED0.00
2ND Clutch
Driven Gear BearingGMO864405449.95
Support
Driven Sprocket SupportGMO24209098307.02
2ND Clutch PistonGMO2420833629.40
Clutch Spring
2ND Clutch SpringGMO2420617024.39
4TH Clutch SpringGMO242030918.28
Clutch Piston
4TH Clutch PistonGMO2420856048.77
Outer Seal
Part of Seal Kit.GMO864491724.39
Inner Seal
Part of Seal Kit.GMO864491724.39
Snap RingGMO242038287.34
GMO242029517.34
GMO242061717.48
Oil SlingerGMO242018698.44
WashersGMO242044348.48
GMO242048428.28Order By Color.
Waved Clutch Plate
2ND Clutch Plate-WavedGMO242029508.48
2ND Clutch PlateGMO242136625.05
2ND Clutch Apply PlateGMO2420410326.79
2ND Clutch Plate-SteelGMO242041047.13
Backing PlateGMO2420410516.25
SealGMO2421341029.33
GMO2421341029.33
Bushing
     Part Of Drum Kit.
Reverse BandGMO24213362161.55
Drum
2ND Clutch DrumGMO24212951160.74
Ring SetGMONOT LISTED0.00
BearingGMO2422768516.04
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.