Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2007HHR L4-2.4LREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSDESCRIPTION AND OPERATIONADHESIVE SERVICE KIT DESCRIPTION
2007 Chevrolet HHR L4-2.4L
Adhesive Service Kit Description
2007 Chevrolet HHR L4-2.4LSECTION Adhesive Service Kit Description
ADHESIVE SERVICE KIT DESCRIPTION
The GM of Canada Adhesive Caulking Kit, P/N 10952983, contains the following items:
- Four different primers
- A tube of urethane adhesive with a nozzle
- Four daubers
- Instructions with warnings
Use the urethane adhesive caulking kit for replacement of any urethane adhesive-installed window using the full cut method.
In the United States or Canada, you may use any of the following equivalent urethane adhesive systems which meet GM Specification GM 3651G:
- Dow Automotive - Essex 400HV. One part and requires associated primers.
- Dow Automotive - Essex U216. Two part and requires associated primers.Call Dow Automotive at 1-800-453-3779 for more information.
- 3M(TM) "Fast Cure" Auto Glass Urethane. One part and requires associated primers.Call 3M(TM) at 1-877-666-2277 for more information.
Use these materials based on specific manufacturer. Do NOT intermix primers or adhesives from one manufacturer to another.
Always follow the system manufacturer's instructions for application, handling, and curing.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.