Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Final Drive and Differential Assembly Install
2007 Chevrolet HHR L4-2.4LSECTION Final Drive and Differential Assembly Install
Final Drive and Differential Assembly Install
Tools Required
J 36850 TRANSJEL(TM)
1. Install the final drive carrier to case thrust bearing (117) onto the final drive carrier. Retain the bearing with J 36850.
2. Install the complete final drive carrier assembly (116) into the transmission case (51).
Important: Install the sun gear with the grooved side up (flat side down).
3. Install the final drive sun gear (115) into the final drive carrier (116).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.