Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2007HHR L4-2.2LREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSA/T - SHIFT LOCK CONTROL FEATURE FUNCTION
2007 Chevrolet HHR L4-2.2L
A/T - Shift Lock Control Feature Function
2007 Chevrolet HHR L4-2.2LSECTION A/T - Shift Lock Control Feature Function
Bulletin No.: 03-07-30-043A
Date: May 25, 2006
INFORMATION
Subject:
Information Regarding Automatic Transmission Shift Lock Control Function
Models:
2007 and Prior Passenger Cars and Trucks (Including Saturn)
2007 and Prior HUMMER H2, H3
2005-2007 Saab 9-7X
with Automatic Transmission
Supercede:
This bulletin is being revised to add models and model years. Please discard Corporate Bulletin Number 03-07-30-043 (Section 07 - Transmission/Transaxle). This bulletin is being issued to better explain how the Automatic Transmission Shift Lock Control (formerly known as Brake Transmission Shift Interlock (BTSI)) feature is intended to operate. Revised wording regarding the shift lock control system began appearing in the Owner Manuals beginning with the 2004 model year.
The shift lock control feature was intended to prevent drivers from shifting out of Park with the vehicle running without the brakes applied. However, if the ignition switch is in the Accessory (ACC) position, it may be possible on some vehicles to move the shift lever out of Park WITHOUT first activating the brake.
The shift lock control system is ONLY active when the ignition switch is in the RUN or ON position. This means that when the ignition switch is in the RUN or ON position, the shift lever cannot be moved out of the Park position without activating the brake.
Some owners may feel that the shift lock control system prevents an unattended child from moving the vehicle. Please stress to owners, as stated in the Owner Manual, that children should NEVER be left unattended in a vehicle, even if the ignition key has been removed from the vehicle.
Disclaimer
Date: May 25, 2006
INFORMATION
Subject:
Information Regarding Automatic Transmission Shift Lock Control Function
Models:
2007 and Prior Passenger Cars and Trucks (Including Saturn)
2007 and Prior HUMMER H2, H3
2005-2007 Saab 9-7X
with Automatic Transmission
Supercede:
This bulletin is being revised to add models and model years. Please discard Corporate Bulletin Number 03-07-30-043 (Section 07 - Transmission/Transaxle). This bulletin is being issued to better explain how the Automatic Transmission Shift Lock Control (formerly known as Brake Transmission Shift Interlock (BTSI)) feature is intended to operate. Revised wording regarding the shift lock control system began appearing in the Owner Manuals beginning with the 2004 model year.
The shift lock control feature was intended to prevent drivers from shifting out of Park with the vehicle running without the brakes applied. However, if the ignition switch is in the Accessory (ACC) position, it may be possible on some vehicles to move the shift lever out of Park WITHOUT first activating the brake.
The shift lock control system is ONLY active when the ignition switch is in the RUN or ON position. This means that when the ignition switch is in the RUN or ON position, the shift lever cannot be moved out of the Park position without activating the brake.
Some owners may feel that the shift lock control system prevents an unattended child from moving the vehicle. Please stress to owners, as stated in the Owner Manual, that children should NEVER be left unattended in a vehicle, even if the ignition key has been removed from the vehicle.
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.