Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2007HHR L4-2.2LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSAUTOMATIC TRANSMISSION/TRANSAXLEFLUID PAN, A/T
2007 Chevrolet HHR L4-2.2L
Fluid Pan, A/T
2007 Chevrolet HHR L4-2.2LSECTION Fluid Pan, A/T
Oil Pan
Install the gasket (87) and bottom pan (88) onto the transmission case.
Install the twelve bottom pan bolts (81).
Hand start the bolts.
Tighten the bottom pan bolts to 12 N.m (106 lb in).
Install the gasket (87) and bottom pan (88) onto the transmission case.
Install the twelve bottom pan bolts (81).
Hand start the bolts.
Tighten the bottom pan bolts to 12 N.m (106 lb in).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.