Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2007HHR L4-2.2LREPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYTESTING AND INSPECTIONSYMPTOM RELATED DIAGNOSTIC PROCEDURESSYMPTOMS - REMOTE FUNCTIONS
2007 Chevrolet HHR L4-2.2L
Symptoms - Remote Functions
2007 Chevrolet HHR L4-2.2LSECTION Symptoms - Remote Functions
Symptoms - Remote Functions
Important: The following steps must be completed before using the symptom tables.
1. Perform Diagnostic System Check - Vehicle before using the Symptom Tables in order to verify that all of the following are true:
* There are no DTCs set.
* The control modules can communicate via the serial data link. Initial Inspection and Diagnostic Overview
2. Review the system operation in order to familiarize yourself with the system functions. Refer to Keyless Entry System Description and Operation.
Visual/Physical Inspection
* Inspect for aftermarket devices which could affect the operation of the Keyless Entry System.
* Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections in Diagnostic Aids. Component Tests and General Diagnostics
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
* Keyless Entry System Inoperative
* Remote Vehicle Start Inoperative
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.