Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2007EXPRESS 2500 V8-6.0LREPAIR AND DIAGNOSISWIPER AND WASHER SYSTEMSWIPER BLADESERVICE AND REPAIRREMOVAL AND REPLACEMENT
2007 Chevrolet Express 2500 V8-6.0L
Removal and Replacement
2007 Chevrolet Express 2500 V8-6.0LSECTION Removal and Replacement
WIPER ARM BLADE REPLACEMENT
REMOVAL PROCEDURE
1. Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm.
2. Bring the wiper arm out through the opening in the wiper blade.
INSTALLATION PROCEDURE
1. Insert the hook of the wiper arm through the opening in the wiper blade.
2. Position the wiper blade pivot in the inside radius of the wiper arm hook.
3. Pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
4. Operate the wipers and inspect for proper operation.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.