Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2007EXPRESS 2500 V8-6.0LREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSSERVICE AND REPAIRHINGED REAR WINDOW REPLACEMENT
2007 Chevrolet Express 2500 V8-6.0L
Hinged Rear Window Replacement
2007 Chevrolet Express 2500 V8-6.0LSECTION Hinged Rear Window Replacement
HINGED REAR WINDOW REPLACEMENT
REMOVAL PROCEDURE
1. Remove the rear door trim panel.
2. CAUTION: Refer to Glass and Sheet Metal Handling Caution.
Use safety glasses and gloves.
3. Remove the screws (1) that retain the latch to the door.
4. Remove the screws that retain the hinge (3) to the door.
5. Remove the window assembly from the vehicle.
INSTALLATION PROCEDURE
1. Install the window assembly to the vehicle.
2. NOTE: Refer to Fastener Notice.
Install the screws that retain the hinge (3) to the door.
Tighten the screws to 3 N.m (27 lb in).
3. Install the screws (1) that retain the latch to the door.
Tighten the screws to 3 N.m (27 lb in).
4. Install the rear door trim panel.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.