Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2007EXPRESS 2500 V8-6.0LREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLDISC BRAKE SYSTEMSERVICE AND REPAIRFRONT BRAKE SHIELD REPLACEMENT
2007 Chevrolet Express 2500 V8-6.0L
Front Brake Shield Replacement
2007 Chevrolet Express 2500 V8-6.0LSECTION Front Brake Shield Replacement
Front Brake Shield Replacement
Removal Procedure
Caution: Refer to Brake Dust Caution.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the hub and bearing assembly (5).
4. Remove the splash shield (6), for 15 series.
5. Remove the splash shield, for 25/35 series.
Installation Procedure
1. Install the splash shield (6), for 15 series.
2. Install the splash shield, for 25/35 series.
3. Install the hub and bearing assembly (5).
4. Install the tire and wheel assembly.
5. Remove the safety stands.
6. Lower the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.