Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2007EXPRESS 2500 V8-6.0LREPAIR AND DIAGNOSISBODY AND FRAMESEATSSERVICE AND REPAIRSEAT RISER REPLACEMENT
2007 Chevrolet Express 2500 V8-6.0L
Seat Riser Replacement
2007 Chevrolet Express 2500 V8-6.0LSECTION Seat Riser Replacement
Seat Riser Replacement
Removal Procedure
1. Remove the front seat assembly from the vehicle.
2. Remove the nuts (2) that retain the seat riser (3) to the seat adjuster (1).
3. Remove the front seat assembly from the seat riser.
Installation Procedure
1. Position the front seat riser into the vehicle.
Notice: Refer to Fastener Notice.
2. Install the nuts in order to retain the seat riser to the vehicle.
Tighten the nuts to 60 N.m (44 lb ft).
3. Position the front seat assembly to the seat riser.
4. Install the seat adjuster nuts (2).
5. Install the nuts (2) in order to retain the seat adjuster (1) to the seat riser (3).
Tighten the nuts (2) to 45 N.m (33 lb ft).
6. Install the front seat assembly to the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.