Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2007EXPRESS 2500 V8-6.0LREPAIR AND DIAGNOSISBODY AND FRAMEFRAMETRAILER HITCHSERVICE AND REPAIRWEIGHT DISTRIBUTION HITCH REPLACEMENT
2007 Chevrolet Express 2500 V8-6.0L
Weight Distribution Hitch Replacement
2007 Chevrolet Express 2500 V8-6.0LSECTION Weight Distribution Hitch Replacement
Weight Distribution Hitch Replacement
Removal Procedure
1. Remove the hitch to frame mounting bolts and the nuts.
2. Remove the hitch from the vehicle.
Installation Procedure
1. Install the hitch to the vehicle.
Notice: Refer to Fastener Notice.
2. Install the hitch to frame mounting nuts and the bolts.
Tighten the nuts to 88 N.m (65 lb ft).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.